Pedestrian and Traffic Coating Systems

Yes, pedestrian coatings incorporate slip-resistant aggregate or texture that improves traction in wet conditions, reducing slip-and-fall risk. They also create a visible, uniform walking surface that helps direct foot traffic.

Pedestrian and traffic coating systems are durable, flexible membranes applied to concrete surfaces that experience foot traffic, vehicular traffic, or both. They waterproof the concrete deck while providing a slip-resistant wearing surface, protecting the structure from moisture infiltration and chloride exposure.

Common applications include parking garage decks, elevated walkways, plaza decks, balconies, loading docks, and any horizontal concrete surface exposed to weather and traffic. We install these systems on commercial structures across Iowa, Wisconsin, Minnesota, and Illinois.

Cost depends on the deck area, the condition of the existing concrete, the coating system specified, and access logistics. We work with building owners to scope the work accurately and can phase large projects over multiple periods to match available budget. Contact us to schedule a site visit and proposal.

Service life depends on the product system, traffic volume, exposure conditions, and maintenance practices. Material manufacturers provide their own product warranties, and we back installation with a 2-year written workmanship warranty.

Common failure modes include poor surface preparation, moisture in the concrete at the time of application, excessive movement in the deck, deferred maintenance, and damage from snowplows or heavy equipment. Proper investigation before installation and correct surface preparation are the most important factors in long-term performance.

They create a waterproof barrier that prevents water and deicing salts from reaching the concrete deck and reinforcing steel below. Without a coating, chloride-laden water penetrates the concrete, corrodes the rebar, and causes the spalling and structural deterioration common in Midwest parking structures.

In some cases, yes, but only if the existing coating is well-bonded and the concrete deck beneath is sound. We evaluate the existing conditions during an on-site investigation and recommend whether overlay or full removal and reapplication is the better approach.

Regular sweeping, prompt repair of any cuts or gouges, periodic restriping, and inspection for wear areas extend the life of the system significantly. We provide a closeout package with product data sheets that include the manufacturer's specific maintenance requirements.

Duration depends on deck size, the extent of concrete repair needed before coating, and whether the area can be fully closed or must remain partially open during work. Our estimators provide a project-specific timeline during the proposal process.

A traffic coating is designed to be the wearing surface exposed directly to foot and vehicle traffic, while a waterproofing membrane is typically buried under topping slabs, pavers, or other cover materials. Traffic coatings must resist abrasion, UV, and chemical exposure in addition to blocking moisture.

Yes, we routinely install traffic coatings on occupied structures by phasing the work across sections so a portion of the deck remains open for use at all times. Our team coordinates with building management to minimize disruption to tenants and operations.